Kurzweil PC2R Musician's Manual page 28

Playing Your PC2R
The Front Panel
To select a program or setup this way, press the Group button to display a category of programs
or setups. Use the Alpha Wheel or cursor buttons to scroll through the categories. Press Enter to
select the first program or setup in that category.
If you're in Internal Voices mode or KB3 mode, you can scroll all the way through the Internal
Voices categories and into the KB3 categories (and vice versa). The PC2R automatically switches
to the corresponding performance mode. Setups are separate, however; you can't switch
performance modes by scrolling through setup categories.
When you're editing programs or setups, press Menu to select the first menu of programming
parameters in the current edit mode. Use the cursor buttons to view the available menus, then
press Enter to view the parameters in the current menu. When you're viewing parameters, press
Menu again to return to the list of menus.
Cursor Buttons
These are the Left and Right arrow buttons under the Edit/Store and Group/Menu buttons.We
call them cursor buttons because they control the cursor, which is a bar that appears under one of
the characters in the display. The position of the cursor indicates what's selected for changing or
editing.
The following table shows what happens in each performance mode when you press one of the
cursor buttons.
Internal Voices
KB3
MIDI Setups
You'll also use the cursor buttons when editing, to select what you want to edit. See Basic Editing
Concepts on page 4-1 for more about the cursor buttons.
Compare
When you're editing, the Compare button lets you listen to the effect of a change, then to check
the original. See page 4-8 for details.
Copy
When you're editing setups, you can copy a zone and paste it into another zone, either in the
same setup, or in a different setup.
Cancel/No
Use this button to exit from edit modes, and to answer "No" to prompts in the display (like
Save|Voice|1?
Enter/Yes
Use this button to enter program or setup categories in performance modes, to get into menus
while editing, and to answer "Yes" to prompts in the display.
3-10
Mode
Selects bank ID parameter or program ID parameter
Selects bank ID parameter, program ID parameter, or chorus/vibrato setting parameter
None
).
Function