Table of Contents
Advertisement
+
MODE
–
SPEED/ODO display mode
The SPEED/ODO mode shows the speed and the total kilometers traveled.
When the front wheel stops turning, the display will automatically change
to the SPEED/H mode.
The information will disappear in the display when the front wheel stops
turning for 1 minute.
Tripmaster switch
The switch has 3 buttons: MODE, + (plus) and – (minus).
–
The tripmaster switch is mounted on the outer left of the handlebar on the
USA models. The switch is located to the left of the speedometer on
European models but can also be mounted on the outer left of the
handlebar with a retaining clamp (ET.NO. 583.14.069.350).
MODE
D
O NOT TRY TO CHANGE THE MODE OR READ THE SETTINGS WHILE DRIVING
ATTENTION WILL BE DISTRACTED FROM THE TRAFFIC WHICH CAN EASILY LEAD TO AN
.
ACCIDENT
Electronic speedometer functions provided by the Tripmaster
+
switch
The display modes on the electronic speedometer will change in the
following order. If not, please read the chapter "ACTIVATING AND
DEACTIVATING THE DISPLAY MODE."
SPEED/ODO display mode
SPEED displays the speed in KPH or MPH. The displayed figure cannot be
cleared.
ODO displays the kilometers or miles traveled. The displayed figure cannot
be cleared.
+
no function
BUTTON
–
no function
BUTTON
press the MODE
press and hold the MODE
SPEED/MAX display mode
MAX displays the maximum speed. It is always active.
+
no function
BUTTON
–
no function
BUTTON
press the MODE
press and hold the MODE
SPEED/LAP display mode
LAP displays the stopped lap time in hours, minutes and seconds.
+
Starts and stops the stop watch. The lap time is not reset to 0.
BUTTON
–
Stops the running stop watch, stores the lap time and restarts
BUTTON
the stop watch. The time is reset to 0. A total of 10 lap times
can be stored and read in the SPEED/LAP display mode. To
clear all of the stored lap times, hold the MODE button for 3
seconds in the SPEED/LAP mode.
press the MODE
If no lap time is stored or the motorcycle is driving, the LAP/LAP
mode will be skipped.
press and hold the MODE
stored lap times to 0
WARNING
to change to the next mode
BUTTON
3
to change to the next mode
BUTTON
SECONDS
to change to the next mode
BUTTON
3
to reset the MAX figure to 0
BUTTON
SECONDS
to change to the next mode
BUTTON
3
to reset the LAP figure and all
BUTTON
SECONDS
. Y
OUR
7
Hide quick links:
Advertisement
Table of Contents
