Xerox ColorQube 9301 Quick Manual page 10

®
Xerox ColorQube™ 9301/ 9302/ 9303
How to use the USB Port
Preparation
1. Press the Clear All (AC)
any previous screen programming selections.
2. Insert the USB Flash Drive into the USB port located on the left
side of the device.
Scan
3. Load the original documents face up in the document feeder or face
down on the document glass.
4. Select the Scan to USB
displayed.
5. Make any programming changes that are required.
6. Press Start to scan the originals and process the scan job.
The scanned images are fi led on the USB Flash Drive in the root
directory.
Print
7. Select the Print from USB
displayed.
8. Use the up/down arrows to scroll and select the folder and Print Ready
job you require.
9. Make any programming changes that are required.
10. Enter the quantity required and press
The print job enters the job queue ready for processing.
More information
For more information, please refer to:
• User Guides
• http://www.support.xerox.com
XEROX®, XEROX and Design® and ColorQube® are trademarks of Xerox Corporation in the United States and/or other countries. ©
2010 Xerox Corporation. All rights reserved.
button twice and then Confi rm
option. The Workfl ow Scanning tab is
option. The Print From... options are
Start to print the job.
to cancel
3
3
4
7
6/10