Telstra Elite User Manual page 64

TELSTRA ELITE™ GATEWAY USER GUIDE
Options
Filter Name
Protocol
Source IP address
Source Subnet Mask
Source Port (port or port:port)
Destination IP address
Destination Subnet Mask
Destination port (port or port:port)
Click Save/Apply to save and activate the filter.
Incoming IP Filter
The default setting for all Incoming traffic is BLOCKED. Under this condition only those
incoming IP packets that match the filter rules will be ACCEPTED.
64
Description
The filter rule label
TCP, TCP/UDP, UDP or ICMP
Enter source IP address
Enter source subnet mask
Enter source port number or port range
Enter destination IP address
Enter destination subnet mask
Enter destination port number or range