Quick Setup; Setup Procedure (With Usb Key) - Telstra Elite User Manual

TELSTRA ELITE™ GATEWAY USER GUIDE

QUICK SETUP

2 . 1 SET UP P RO C ED U R E ( WI TH USB KE Y )
These steps explain how to quickly setup your Next G™ Gateway:
1: Insert your SIM card (until you hear a click) into the USIM slot on the rear of the gateway.
2: Connect the yellow Ethernet cable to one of the yellow LAN ports found on the back
of the gateway.
3: Connect the other end of the yellow networking cable to the Ethernet port on
your computer.
4: Connect the power adapter to the power socket on the back of the gateway.
5: Plug the power adapter into a wall socket and press the power button into the
ON position.
6: Configure the gateway through the Web User Interface (WUI).
NOTE: Chapters 4 through 8 explain how to set up and use the WUI
7: Save the gateway configuration and reboot (see section 7.5).
12