Update Firmware - Telstra Elite User Manual

7.1.4 UPDATE FIR MWAR E
The following screen appears when selecting Update Firmware. By following the steps on this
screen, you can update your gateway's firmware.
1. Obtain an updated software image file
2. Enter the path and filename of the firmware image file in the Software File Name field
or click the Browse button to locate the image file.
3. Click the Update Software button once to upload and install the file.
NOTE: The update process will take about 2 minutes to complete. The gateway will reboot and the browser window will
refresh to the default screen upon successful installation.
It is recommended that you compare the Gateway Firmware Version at the top of the Basic
screen (WUI homepage) with the firmware version installed, to confirm the installation
was successful.
TELSTRA ELITE® GATEWAY USER GUIDE
49