Mac Filter - Telstra Elite User Manual

6 . 4 M AC FI LTER
This screen appears when Media Access Control (MAC) Filter is selected. This option allows
access to be restricted based upon the unique 48-bit MAC address assigned to a network
enabled device. To add a MAC Address filter, click the Add button shown below.
To delete a filter, select it from the table below and click the Remove button.
Option
MAC Restrict Mode
MAC Address
Enter the MAC address on the screen below and click Save/Apply.
Description
Disabled – Disables MAC filtering
Allow – Permits access for the specified MAC addresses.
NOTE: Add a wireless device's MAC address before clicking the Allow radio button or else
you will need to connect to the gateway's web user interface using the supplied
yellow Ethernet cable and add the wireless device's MAC address.
Deny – Rejects access for the specified MAC addresses
Lists the MAC addresses subject to the MAC Restrict Mode. The Add button
prompts an entry field that requires you type in a MAC address in a two-
character, 6-byte convention: xx:xx:xx:xx:xx:xx where xx are hexadecimal
numbers. A maximum of 60 MAC addresses can be added.
TELSTRA ELITE® GATEWAY USER GUIDE
43