Aztech HL117 E User Manual page 9

Label
Power LED
Powerline Activity
B
C Ethernet Activity
D Ethernet Port
Simple Connect
Button /
Reset Button
E
Status Description/ Function
Off No power.
On HomePlugAV is on a Power Saving Status
when LED is on steady color.
When Simple Connect is pressed for 5-8
seconds, this LED will turn OFF and turn ON
to confirm the Private Network Name reset.
After Simple Connect is pressed for 2-4
seconds, this LED will blink to confirm the
button press.
Off Device is not connected to a HomePlug AV network.
On When Simple Connect is pressed for 5-8
seconds, this LED will turn OFF to confirm
the Private Network Name reset.
This LED is steady in color when the device
is part of a HomePlug AV network.
The LED colors represents the connection
rate within the HomePlug AV network
whether it is good (red), better (amber), or
best (green).
Off An Ethernet device is not connected.
On This LED is steady when an Ethernet device
is connected.
When Simple Connect is pressed for 5-8
seconds, this LED will turn OFF and turn ON
to confirm the Private Network Name reset.
(Ethernet is connected)
The LED flashes to indicate Ethernet
activity.
Accepts either cross or straight Ethernet cable.
Press to create or join a HomePlug AV network. It
can also be used to reset the Private Network Name
to a random key.
When Simple Connect is pressed for 5-8 seconds, it
will randomize the Private Network Name.
Press for 10-13 seconds to reset to the factory
default settings. When you reset to the factory
default, all your configuration changes will be
removed.
User Manual
Page 9 of 43