Reversing Dryer Door Swing - Maytag MLE20PD Installation Instructions Manual

REVERSING DRYER DOOR SWING
NOTE: Dryer only. Washer door is not reversible.
Remove the Door Assembly
1. Place a towel or soft cloth on top of dryer or work space to avoid
scratching of the surface.
2. Remove 3 of the 4 screws that hold the door hinge on the front
panel of the dryer. Partially loosen the remaining screw with
keyhole opening and lift the door off the screw.
\
4. Lift the inner door assembly off outer door assembly.
5. Rotate outer door 180 °.
3. Lay the door assembly on a previously prepared flat surface
with the inside (inner door assembly) facing up, and remove 6
phillips-head screws to release outer door assembly from inner
door assembly.
NOTE: It is important that you remove only 6 indicated screws.
Reverse Hinge
1. Use a small flat-blade screwdriver to remove 2 plug strips from
the inner door. Slide the head of the screwdriver under the
plugs, without scratching inner door surface, and lift up strip.
2. Remove the 4 screws that attach to inner door hinge.
24