Connecting Cables; Atx Power Connector; Processor Power Connector; Nmi Button - Supermicro SUPER X5DPL-8GM User Manual

S
UPER X5DPL-8GM/X5DPL-iGM User's Manual
2-5

Connecting Cables

ATX Power Connector

The main power supply connector
meets the SSI (Superset ATX) 24-
pin specification, however it also
supports a 20-pin power supply
connector. Make sure that the ori-
entation of the PS connector is
correct.
Processor Power
Connector
In addition to the Primary ATX
power connector (above), the
12v 8-pin Processor Power Con-
nector at J15 must also be con-
nected to your power supply. See
the table on the right for pin defini-
tions.

NMI Button

The non-maskable interrupt button
header is located on pins 19 and
20 of JF2. Refer to the table on
the right for pin definitions.

Power LED

The Power LED connection is lo-
cated on pins 15 and 16 of JF2.
Refer to the table on the right for
pin definitions.
ATX Power Supply 24-pin Connector
Pin Definitions
Pin Number Definition
13 +3.3V
14 -12V
15 COM
16 PS_ON#
17 COM
18 COM
19 COM
20 Res(NC)
21 +5V
22 +5V
23 +5V
24 COM
Processor Power
Connector (J15)
1 thru 4
5 thru 8
NMI Button Pin
Definitions (JF2)
Pin
Number
19
20
PW R_LED Pin Definitions
Pin
Number
15
16
2-8
Pin Number Definition
1 +3.3V
2 +3.3V
3 COM
4 +5V
5 COM
6 +5V
7 COM
8 PW R_OK
9 5VSB
10 +12V
11 +12V
12 +3.3V
Pins Definition
Ground
+12v
Definition
Ground
Control
(JF2)
Definition
Vcc
Control