Installation Requirements - Kenmore 11017122700 Installation Instructions Manual

INSTALLATION REQUIREMENTS
Gather the required tools and parts before starting installation.
The parts supplied are in the washer basket.
Tools needed for connecting the drain hose and water
inlet hoses:
• Pliers that open to lg/le '' • Flashlight (optional)
(3.95 cm)
Parts supplied:
Alternate Parts
Your installation may require additional parts. Parts listed are
available from your local Sears store or Sears Service Center. For
further information, call 1-800-4-MY-HOME e (1-800-469-4663).
If You Have: You Will Need to Buy:
Laundry tub or
standpipe taller
than 96" (2.4 m)
Sump pump system (if not already
available)
A B C
A. Drain hose form
B. Water inlet hoses (2)
C. Flat water inlet hose washers (4)
Tools needed for securing the drain hose and leveling
the washer:
• Adjustable or open end • Wood block
wrench g/le" (14 mm) • Ruler or measuring tape
•
Level
Parts supplied:
1" (2.5 cm)
diameter
standpipe
1V4" (3.2 cm) diameter to 1" (2.5 cm)
diameter standpipe adapter,
Part Number 280130
Overhead sewer
Standard 20 gal. (76 L) 39" (99 cm) tall
drain tub or utility sink, sump pump and
connectors (available from local
plumbing suppliers)
Floor drain Siphon break kit, Part Number 280129;
additional drain hose,
Part Number 3357090
Water faucets 2 longer water fill hoses:
beyond reach of 6 ft (1.8 m) Part Number 76314,
fill hoses 10 ft (3.0 m) Part Number 350008
Drain hose too Kit Part Number 280131
short
Lint clogged drain Drain protector, Part Number 367031
A B
A. Beaded tie strap
B. Front leveling feet with nuts (2)
2