Kenmore 110.1611 Series Quick Start Manual

We have taken great care to give your new washer the most convenient and easy-to-use features. Use this guide to help optimize the use of your
washer. Consult the Use and Care Guide for more detailed instructions. To contact the Sears Service Center, call 1-800-4-MY-HOME e (1-800-469-4663).
Super
Small Large Hot /Cold
Short
Heavy Duty
Cold / Cold
10
Regular Spn
Regular Warm / Cold 12
Warm / Cold Sup_ r
Hot / C°ld
Permanent
Short a,i
Col_/ Cold Press I
Super
1o
Hot / Cold
Regular
Models/Modeles 110.1611
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
Short
Cold/ Cold
Push & lureCloekwkse toSet PuR toStcJrt Push toStop
Fire Hazard
Never place items in the washer that are
dampened with gasoline or other flammable fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any type of
oil on it (including cooking oils).
Doing so can result in death, explosion, or fire.
Measure detergent and pour into washer.
Drop sorted load loosely into washer. Load evenly
around agitator to maintain balance.
Close the lid.
Adjust controls based on your load.
Pull out Cycle Selector (Timer) knob to start.
Push in Cycle Selector (Timer) knob to stop the washer.
LEVELCON? OL
Adjust to load size. Clothes should move freely. To
change the water level after the wash action starts,
you may turn knob to desired setting. On models with
Variable Water Level Control, you can change the water
level by turning the knob to Reset, then to the desired
setting. This is necessary only when the change needs
to be done once the machine has started to fill.
8566916
,J
Continued on back