Masonry Construction - Kenmore 25370229001 Installation Instructions Manual

OPTIONAL: Caulking and installation of trim on
interior wall may be done. You can buy wood
from your local lumber or hardware supply. On
the outside, caulk openings around top and sides
of cabinet, and all sides of wood sleeve to the
opening.
NOTE: See Step 7, Item 3 of Window Mounting
Instructions for bottom rail seal location.
Masonry Construction
1. Cut or build a wall opening in the masonry
wall similar to the frame construction (refer to
Step 2 of Thru-the-Wall Installation for a wall
thickness greater than 8-1/2').
2. Secure cabinet in place using masonry nails, or
the right masonry anchor screws. (Another
way to do this is to build an in-between frame
of 2x4's as shown in the Step 2 Prepare Wall
illustrations--- but make it double framed on
either side, and install between masonry wall
opening and cabinet. Frame must be securely
anchored to masonry wall opening.) This way
gives very good louver clearance on either side
of cabinet.
.
Install a lintel to support masonry wall above
cabinet. Existing holes in cabinet can be used
and/or additional holes can be drilled to fasten
cabinet at various positions, Be sure that side
louver clearance is in accordance with Step 1
above.
4. Install exterior cabinet support brackets as
shown in Step 2 of Thru-the-Wall Installation.
Caulk or flash if needed, to provide a weather-
tight seal around top and sides of cabinet.
5. To complete installation, apply wood trim
molding around room side projection of
cabinet.
8