Kenmore 25370229001 Installation Instructions Manual page 5

1.
Extend Window Filler
Panels
Carefully raise window to expose filler panel
locking screws. Loosen screws so filler panels
slide easily.
I_lilnstall Chassis into
Cabinet and Install
Front to Unit
1. Lift chassis and carefully slide it into installed
cabinet.
2. _ Do not push on controls OR
finned coils.
3. Be sure chassis ks firmly seated towards rear of
cabinet.
4. Refer to Owner's Guide for front installation.
2. Extend panels to fill window opening
completely. Tighten locking screws on too.
3. Close window behind top angle.
o
Install Window Lock
and Sash Seal
Trim sash seal to fit window width. Insert
into space between upper and lower sashes.
_IDOW SASH SEAL
2. Attach right angle safety lock as shown.
head screw