Tools Required - Kenmore 25370229001 Installation Instructions Manual

4. CHECK FOR ANYTHING THAT COULD
BLOCK AIRFLOW - check area outside
of window for things such as shrubs,
trees, or awnings. Inside, be sure
furniture, drapes, or blinds will not
stop proper airflow.
5. Check the available electrical service -
power supply must be the same as that
shown on the unit serial nameplate. (See
Owner's Guide fDr serial plate location.)
Power cord is 48" long. Be sure you have an
outlet near. It is best to not use extension
cords!
All models have a 3-prong service plug to
provide proper service and safe positive
grounding. Do not change plug in any way.
Do not use an adapter plug. If your present
wall outlet does not match your plug, call a
qualified electrician to make the needed
change.
Avoid fire hazard or
rtX_a_t¢
electric shock. Do not use an extension
cord or an adapter plug. Do not remove
any prong from the power cord.
Groundin¢
Powersupply
cord with 3-prong
grounding plug
6. Carefully unpack air conditioner - remove
all packing material. Protect floor or carpet
from damage. Two people should be used to
move and install unit.
Tools Required
a large flat blade screwdriver
x/ #2 Phillips screwdriver
_] tape measure
"_ adjustable wrench or pliers
4 pencil
Hardware
(in plastic bag)
Washer Head
Locking Screw
3/4" Long Hex-
Head Scow
Safety Lock
_ 1/2" Long
Screw and
Locknut
_@ 3/4" Long Flat
Head Bolt and
Locknut
?
Sill Angle
Bracket 2
Screws Top
Angle Side
Retainer
Top Angle &
Side Retainers
2
3
1
4 ea.
2 e2.
10
2
f
2