Using Microstealth; Introduction; Installation - Wavetek MS1000 Operation Manual

INTRODUCTION

The best way to learn about microStealth is to use it. Section 2
discusses the individual measurements available with the MS1000.
Each measurement mode discussion includes detailed descriptions
on how to perform the measurement as well as operating controls
and indicators.

INSTALLATION

The INSTALLATION mode allows you to easily check the
channels that you have just installed and verify that they are within
limits. If you have configured channel packages, you can tell your
microStealth which packages the subscriber has ordered and it will
display only those channels.
Press the key to select the INSTALLATION mode or choose
the icon from the NAVIGATOR. Your microStealth will begin
measuring all the enabled channels in the plan. A bar graph
indicates the percentage of channels measured. When microStealth
has finished, you can view the results and verify that all channels
are within limits.
MODEL MS1000
2
Using
microSTEALTH
25