Level; Adjusting The Reference Level; Tuning By Channel - Wavetek MS1000 Operation Manual

LEVEL

Press the key to select LEVEL mode or choose the icon
from the NAVIGATOR. Here you can measure the signal level of a
specific channel or frequency. The level is indicated both numeri-
cally and on an analog meter.

ADJUSTING THE REFERENCE LEVEL

You can adjust the reference level setting of the analog bar meter
using the up and down arrows. When you press the SHIFT +
keys, your microStealth automatically sets the optimum reference
level for you.

TUNING BY CHANNEL

When you are tuned to a channel, both the video and audio carriers
of the channel are measured and displayed simultaneously. The
difference between the video and audio carriers is also shown. The
channel number, type and label for the channel that you are cur-
rently tuned to appear in the upper right-hand portion of the screen.
You can use the left or right arrows to tune to the previous or next
enabled channel in the plan. You can also use the numeric entry
keys to tune directly to the desired channel. Press the soft key
to tune by frequency.
30