Wavetek MS1000 Operation Manual page 34

Note
Be sure that you have enabled all of the test points that you are
interested in using. The
more than one enabled test point. (see EDIT TEST POINTS).
When you have selected the proper test point, microStealth shows
the minimum and maximum carrier level limits for that test point
on the graph. The out-of-limit portion appears as diagonal "hash"
areas. You can toggle the hash lines on and off by pressing the
key.
You can quickly check to see if all SCAN carriers are within limits
by looking at the PASS/FAIL indicator above the graph.
34
Subscriber Drop
Ground Block
Tap
User Defined
soft key is only available if there is