Tuning By Frequency; Measurement Hold; Warning Indicators - Wavetek MS1000 Operation Manual

TUNING BY FREQUENCY

The soft key toggles between frequency and channel tuning.
When you choose frequency tuning, microStealth tunes to the video
carrier frequency of the previously selected channel.
Use the left and right arrows to tune your microStealth. The
frequency increments or decrements by the step size that you have
specified in the Measurement configuration (see FREQUENCY
TUNING STEP SIZE). You can also use the numeric entry keys to
tune directly to the frequency desired.

MEASUREMENT HOLD

You can freeze the level measurement at any time by pressing the
SHIFT + keys. The measurement is retained even if the cable
is disconnected from the input port. Notice that the mode icon in
the upper left-hand portion of the screen appears inverted while the
measurement is on hold. Pressing the SHIFT + keys a second
time releases the hold. The hold is also released when you tune to
a different channel or frequency. The measurement is not retained
when another mode is selected or the microStealth is shut off.

WARNING INDICATORS

If the current measurement is inaccurate due to an out-of-range
condition or hardware failure, microStealth warns you by dimming
the numeric measurement value and displaying one of the following
warning indicators:
31