NETGEAR PS121v2 User Manual page 40

NETGEAR USB Multifunction Printer Server PS121v2 User Manual
4. To edit the IP settings, click LAN IP Setup in the main menu.
Figure 3-9
5. Edit the IP address, IP subnet mask, and gateway IP address, as desired, and click Apply.
Warning: Normally, the DHCP Client field setting should be left in the Disable
6. To change the print server name, click Configure Server in the main menu, edit the name in
the Print Server Name text box, and click Apply.
Note: The print server name must not contain any spaces.
3-8
setting so that the IP address of the device remains fixed. It is not
recommended that you select Enable. If you do, the print server will find
an IP address for you automatically from the router or other DHCP server
in your network. When the DHCP server changes the IP address, you will
be disconnected from the Web GUI and unable to open it again unless
you can ascertain the reassigned IP address. Also, the SmartWizard
operates under the assumption that the IP address of the print server is
fixed.
v1.1, September 2006
Operation