Moving The Range - Whirlpool YSF379LEKQ0 Installation Instructions Manual

if rangedoes not operate:
[] Check that the circuit breaker is not tripped or the house
fuse blown.
[] Check that the power supply cord is plugged into the
wall receptacle.
[] Check that gas line is turned on.
[] See Use and Care Guide for troubleshooting list.
if you need assistance:
if you have questions about operating, cleaning or main-
taining your range:
[] Refer to Use and Care Guide.
[] Call the ConsumerAssistance Center. Check your Use
and Care Guide for a toll-free number to call or call the
dealer from whom you purchased this appliance.
The dealer is listed in theYellow Pages of your phone
directory under "Appliances -- Household -- Major--
Service and Repair:'
if you need service:
Maintain the quality built into your range by calling an
authorized service company.
To obtain the name and number of an authorized service
company:
[] Contact the dealer from whom you purchased your
range; or
[] Look in theYellow Pages of your telephone directory
under "Appliances -- Household -- Major -- Service
and Repair;" or
[] Call the ConsumerAssistance Center.
The toll-free number is listed in your Use
and Care Guide.
When you call, you will need:
[] The range model number.
[] The range serial number.
Both numbers are listed on the model/serial rating plate
located on the frame behind the storage drawer.
Moving the range:
Tip Over Hazard
A child or adult can tip the range and be killed.
Connect anti-tip bracket to rear range foot.
Reconnect the anti-tip bracket, if the range is
moved.
Failure to follow these instructions can result in
death or serious burns to children and adults.
When moving range, slide range onto cardboard or
hardboard to prevent damaging the floor covering.
If removing the range is necessary for cleaning or
maintenance:
1. Remove the storage drawer.
2. Shut offthe gas supply to the range.
3. Slide range forward, away from the wall, just far enough
to disconnect the gas and electric supply lines.
4. Slide range forward to complete cleaning or maintenance.
anti-tip
bracket__
5. Making sure the anti-tip bracket is installed:
• Look for the anti-tip bracket securely attached to floor.
. Slide range back so rear range foot is under
anti-tip bracket.
6. Check that range is level.
7. Reconnect gas line to range and check for leaks.
8. Plug power supply cord into outlet. Reinstall storage
drawer.
Printed in U.S.A.
Part No. 8523154 Benton Harbor, Michigan 49022
@2001Whirlpool Corporation