Erasing The Tracks (Erase) - JVC UX-DM8 Instructions Manual

3 Select track.
4 Select a destination group.
Group title
5
Select the new track number in the destination group
for the target track.
6
Start moving.
"EDITING" appears on the display. The message goes off as
the editing result is stored.
To go back to To quit editing:
previous step:
31
Track title
or

Erasing the Tracks (ERASE)

You can erase tracks on the built-in memory or USB device.
• Once the tracks are erased, you cannot resume them.
Example: Erasing the track "B."
1
Select a desired source.
Built-in USB
memory device
2
Select "ERASE."
TITLE
Canceled
3 Confirm your selection.
4
Select the numbers of tracks you want to erase.
• You can select up to 15 tracks by repeating this step.
When you select a 16th track, "MEMORY FULL"
appears on the display.
5 Confirm your selection.
FORM GR MOVE
ERASE
FORMAT