JVC UX-DM8 Instructions Manual page 19

To program the playing order of tracks on the
built-in memory and USB device
You can arrange the playing order of the tracks in the
built-in memory and USB device (up to 999) before you start
playback.
1 Start and stop playback.
When program the tracks
on the USB device
When program the tracks
on the built-in memory
2 Select the desired track.
• You can also use the number buttons to select the track.
3
Program the desired track.
• If you try to entry a track after registering 999 tracks,
"PROGRAM FULL" appears on the display and the
track will not be programmed.
4 Repeat the above step 2 and 3.
5 Activate Program Play.
PROGRAM
Canceled
Number of the programmed tracks
Group number of a track
that programmed last
Program number
RANDOM
GROUP
RANDOM
GROUP
Track number of a track that
programmed last
6 Start playback.
Built-in USB
memory device
To skip: To pause:
For built-in
memory
To release, press again.
To check the programmed contents
Before or after playback...
In the programmed order.
In the reverse order.
To modify the program
Before or after playback...
To erase the last track/file: To erase the entire
To exit from Program Play
Before or after playback...
PROGRAM
Canceled
* Appears only when "MEMORY" or "USB" is selected as
a source.
Playback starts in the order
you have programmed.
To stop:
For USB
device
program:
2
sec.
RANDOM
GROUP
RANDOM*
GROUP*
16