Preparing The Remote Control; About Display Indicators - JVC UX-DM8 Instructions Manual

How to attach the core filter
Attach the provided core filter to the power cord, then the
core filter reduces interference.
1 2
10 cm
stopper
1 Release the stopper of the core filter.
2 Run the power cord through the core filter, and place the
core filter at about 10 cm away from the rear of the unit.
Wind the power cord 2 times firmly inside the cutout of
the core filter as shown in the illustration.
3 Close the core filter until it clicks shut.
Note:
Do not damage the power cord by applying excessive force
when winding.

About Display Indicators

The indications on the display tell you a lot of things while you are operating the System.
Before operating the System, be familiar with when and how the indicator illuminates on the display.
1 Source status indicators
• CD/MEMORY/USB: Always lights.
• —Source detection indicators:
– CD/MEMORY/USB:See page 8
• REC: See page 21
2 AHB PRO indicator: See page 12
3 Audio file format indicators
4 Main display
5 A.STBY (Auto Standby) indicator: See page 14
6 Recording mode indicators
• NORMAL/HIGH: See page 22
• HQ/SP/EP: See pages 21
7 Radio reception indicators
• ST: See page 7
8 Sound mode indicator: See page 12
9 K2 indicator
• Lights when "CD," "MEMORY" or "USB" is selected as
a source. This means the K2 Technology, which
improves the digital sound quality, is activated.
5
3
1 2
8 9

Preparing the remote control

R6(SUM-3)/AA(15F)
If the range or effectiveness of the remote control decreases,
replace both batteries.
Do not expose batteries to heat or flame.
When using the remote control
Point the top of the remote control toward the remote sensor
as directly as possible. If you operate it from a diagonal
position, the operating range (approx. 5 m) may be shorter.
• Do not block the remote sensor.
3 4 5
p
p Playback mode indicators
• PRGR (program): See page 15
• RND: See page 17
• GR.: See page 17
• SEARCH:See page 19
• :
– : See page 18
– : See page 18
q QP Link (Quick Portable Link) indicator: See page 11
w Timer mode indicator
• SLEEP:See page 14
• : See page 34, 36
• 1/2/3:See page 34, 36
• REC: See page 34
6 7
q w