JVC UX-DM8 Instructions Manual page 29

• When you select an existing group:
1 Select a desired group.
• How to select an existing group, see "To select a
group" on page 9.
2 Start moving the track.
When moving the track
onto built-in memory:
(on the main unit)
• When you want to move to the root group (G1
MUSIC) of the target device:
When moving the track
onto built-in memory:
(on the main unit)
When the moving starts, "MOVE START" appears and
movement process is shown by "%" on the display.
After the progress indication become 100%, "WRITING"
flashes on the display.
When "WRITING" goes off, the moving is completed.
When moving the track
onto USB device:
(on the main unit)
When moving the track
onto USB device:
(on the main unit)
To move a group
• After moving a group onto the target device, the original
group is deleted from the original device, and the following
groups in the original device are re-numbered
automatically.
• If unplayable track or WMA-DRM (Digital Rights
Management) track is included in a group, that group
cannot be moved.
1 Start and stop playback.
When moving a group
from USB device
When moving a group
from built-in memory
2 Activate Group Play then, select a group to move. (See
"Playing a Selected Group only—Group Play" on
page 17.)
3 Select the target device to move the group onto.
When moving the group
onto built-in memory:
(on the main unit)
4 Start moving.
When moving the group
onto built-in memory:
(on the main unit)
When moving starts, "MOVE START" appears and
movement process is shown by "%" on the display.
After the progress indication become 100%, "WRITING"
flashes on the display.
When "WRITING" goes off, moving is completed, and
Group Play is canceled.
When moving the group
onto USB device:
(on the main unit)
When moving the group
onto USB device:
(on the main unit)
26