Advertisement
QuickSpecs
Systems
Step 2c – Front Access Storage Cage - System Disk or Tape Drive - Mandatory
Front Access Storage Cage System Disk Drive Selection - Mandatory
Selection of one system disk drive is mandatory for each Front Access Storage Cage
Mandatory selection of SCSI adapter is required for Front Access Storage Cage
SCSI cable with connections to the four disk drives is included with the Front Access Storage Cage
DS10 Storage Configuration Rules with Selection of Front Access Storage Cage:
DS10 Systems configured with Front Access Storage Cage include a 600-MB 24X slim-line CD-ROM and 1.44-MB drive in
dedicated drive slots
DS10 Systems configured with the Front Access Storage Cage include four storage bays (two Universal SCSI disk drives
and two internal SCSI drives) which can be configured as follows:
- Maximum of two internal disk drives (3.5-inch x 1-inch drives) and two Universal disk drives
(3.5-inch x 1-inch) or one Front Access Universal tape drive (DAT) and two internal disk drives.
Mandatory selection of SCSI adapter for Front Access Cage Systems
SCSI cable included with Front Access Cage
NOTE: IDE drives may not be used in Front Access Cage systems
Internal SCSI Disk Drives
(For Drives
Internal to System Enclosure)
36.4-GB Ultra3 SCSI 10,000 rpm drive
72.8-GB Ultra3 SCSI 10,000 rpm drive
DA - 10908 North America — Version 29 — April 27, 2004
Compaq AlphaServer DS10
Compaq AlphaStation DS10
1. Floppy Disk Drive
2. Internal Drive Bay
3. CD-ROM
4. Compaq Universal Drive Bay
5. Compaq Universal Drive Bay
6. Internal Drive Bay
MR0053
DS-RZ3FD-WA
DS-RZ3GA-WA
Page 9
Advertisement
