Table of Contents
Advertisement
Voice Message Notification
• If you subscribe to a voice mail service, your phone can notify you when
you have a new message. This feature supports Frequency-Shift Keying
(FSK) notification. Contact your voice mail provider for information.
• When you have new messages, the display shows a message icon. After
you listen to your messages, the message icon turns off. If it doesn't, you
can reset it: With the phone in standby, open the menu and select Global
Setup; select VMWI Reset, then select Yes.
USING THE ANSWERING SYSTEM
Answering System Options
You can set or change the answering system options from any station. Just
open the menu and select Answering
Submenu
Security Code
Ring Time
Record Time
Message Alert
Ans. Language
Call Screen
Ans. On/Off
Record
Greeting
Purpose
Enter a 2-digit PIN so you can access your answering
system from any touch-tone phone (see page 19).
Set the number of rings (2, 4, or 6) before the system
answers. If you call in remotely to check your messages,
Toll Saver
makes the system answer after 2 rings if you
have new messages or after 4 rings if you don't.
Set the amount of time
leave a message. Choose
the system to let callers leave a message.
Have the base beep every 15 seconds when you have a
new message. The alert stops after you listen to all your
new messages or if you press any key on the base.
Change the language of the system's voice prompts.
Turn on the call screen feature so you can hear callers on
the base speaker as they leave messages (see page 18).
Turn your answering system on or off. (Handset only)
You can also press
Record an outgoing message or greeting (see below).
(Answering
Setup. Select one of the following:
(1
or
4
minutes) callers have to
Announce Only
on the base.
ans on/oFF
Setup)
if you don't want
English - 17
Advertisement
Table of Contents
