Caller ID problems
Caller ID displays briefly
and then clears.
Multistation problems
I can't transfer calls.
Two handsets can't talk to a caller. x See if any station is in Privacy Mode.
A handset says Unavailable.
I can't register a new handset.
Answering system problems Possible solutions
The answering system does
not work.
The system won't record
messages.
A handset can't access the
answering system.
My outgoing message is gone.
I can't hear the base speaker.
Messages are incomplete.
The system keeps recording
when I answer on an
extension.
Installing a Line Filter or DSL Filter
A telephone line filter or DSL filter prevents services that use the phone
line from causing interference on your phone. To get a line filter, contact
your service provider or look in an electronics store.
Plug the filter into the telephone wall jack and plug the base into the filter.
Make a test call to make sure the noise is gone.
English - 22
Possible solutions
x You may have to change the line mode.
Contact Customer Service for instructions.
Possible solutions
x Reset all the stations (see page 21).
x Move the handset closer to the base.
x See if any station is in Privacy Mode.
x Reset the handset (see page 21).
x See if you have 12 registered handsets.
x Make sure the answering system is on.
x Make sure the base is plugged in.
x See if
Record Time
x Delete messages (memory may be full).
x See if another handset is using the system.
x Make sure the phone is in standby.
x If there was a power failure, re-record
your personal outgoing message.
x Make sure call screening is turned on.
x Change the base speaker volume.
x Increase the
x Delete messages (memory may be full).
x You may have to change the line
mode. Contact Customer Service for
instructions.
is set to
Announce
Record
Time.
Only.