Usage Of The Detergent - Haier HWM70-98 User Manual

2 Usage of the detergent

Washing powder inlet entrance
Softener inlet entrance
How to use the whitener
Fill water to decided level .Dilute the whitener with
container. Pour it slowly into the washing tub.
Avoid using whitener on laundries with colour or
pattern as they are prone to lose colour.
The whitener shall not touch the laundries directly.
Refer to the user's manual for the usage and
quantity of the whitener.
For powder whitener, please dissolve it before use.
Water level, water quantity and dosage of the washing powder
Laundry quantity(kg)
1.0below
Water level Water quantity
About 70L
About 66L
About 60L
About 54L
About 48L
About 42L
About 36L
About 30L
About 24L
About 18L
Add the washing powder or softener into the detergent box
directly as indicated in the left figure.
After adding washing powder ,please close the detergent box.
See to following table for the dosage of the washing
powder.
How to use the washing powder
Direct dissolved in the machine(not applicable for fuzzy
and reserve programs)
1.Fill small quantity of water.
2.Add the power. Run for 30 seconds to dissolve
it completely.
3.Put in the laundries. Select suitable water level.
The instant dissolving of the washing powder:
1. Prepare warm water of 30
2. Add the powder while stirring to fully dissolve it.
It is suggested to use liquid detergent when you
use QUICK WASH.
Please add the powder according to the laundry quantity,
water level and water quantity.
It is suggested not to use high sudsing detergent.
Washing powder with poor quality or not used for a long
period may get blocked. Please clean the detergent box
in time.
Common powder
(add 40g in each 30L water)
About
93.3g
About 88g
About 80g
About 72g
About 64g
About 56g
About 48g
About 40g
About 32g
About 24g
Using process Using process
and a container.
Concentrated powder
(add 30g in each 30L water)
About
58.3g
About 55g
About 50g
About 45g
About 40g
About 35g
About 30g
About 25g
About 20g
About 15g