Electrolux E48DF76EPS Installation Instructions Manual page 35

Professional Series Range LPG Conversion Kit
12-1 Wait for all the burners to coot.
12-2 Fill out and apply the conversion labels:
° Apply one where it can be easily read on the
floor of the chassis.
° Apply the other next to the rating label on the
back of the range.
12-3 Remove all of the burner heads.
12-4 Install the spill tray.
12-5 Replace the burner heads, burner head nuts,
burner rings, and burner caps. Be sure the
igniter wire is connected to the igniter for each
burner head.
12-6 Install the cooktop grates.
12-7 Re-install the regulator access panel on the back
of the range.
CONVERSION INFORMATION
AFFIX THISLABELAS CLOSE AS POSSIBLE TO THE _(ISTING
RATING PLATE.
FOR MODEL NO. RATINGS AND MANIFOLD PRESSURE
INFORMATION: SEEORIGINAL NAME PLATE.
GAS SUPPLYTYPE:
NATURAL G AS FI
u, []
CONVERSION KITP/N
THISAPPLIANCE WAS CONVERTED ON
DAY/MONTHpfEAR
TO. .GASWnHrJTNO,
(INStALL_) (COMPANY NAME)
WHICH ACCI_P3 THERESPONSlBIIJTY THATTHiS CONVERSION
HAS BEENPROPERLYMADE.
Fiqure 12-1 Conversion Label
The Electrotux Professional Series range is equipped with two types of burners:
° Sealed power burners - up to :[7,000 BTU per hour
° Sealed precision burner(s) - up to 8500 BTU per hour (smaller in size than the power burner)
For elevations above 2000 feet, the burners ratings will be reduced at the rate of 4% for each 1000 feet above
sea level.
Page 1:[