Electrolux E48DF76EPS Installation Instructions Manual page 23

Measure from the floor to the countertop and adjust the leveling legs as required to
position the top frame at the desired height, based on the cabinet and countertop
installation. Carefully slide the range into position in the cutout. The rear anti4ip leg
should engage the anti4Jp bracket.
NSTA NO THEBURNER COMPONENTS
[] [] m m m m [] [] [] [] m m m [] [] [] [] m m m m
Remove the brass burner rings, porcelain burner caps, and porcelain gates from
their shipping packages. Place each burner ring onto its corresponding burner
base, being certain that the four alignment tabs slide into the matching notches in
the base. Set each porcelain burner cap on top of its corresponding burner ring.
Place each grate onto the top frame, being certain that the rubber feet are
positioned in the locating dimples.