Table of Contents
Advertisement
9.5.4 Copying the settings
You have the facility to copy all the settings of your digital
receiver (transmitter), such as programme lists, antenna set-
tings, etc. to another digital receiver (receiver) of the same
type, and equipped with the same version of the operating
system software. (Fig. 9-25)
>
To do this, connect the two units by means of a null
modem cable.
>
Switch on the (receiving) receiver.
>
To copy the settings, press any key on the (transmit-
ting) receiver.
The settings of the transmitting receiver will now be
transmitted to the receiving receiver. Please not any
messages displayed on screen.
9.6 System configuration
This menu item will show you the specific unit data, e.g. cur-
rent software version.
>
Use the up/down arrow keys to mark this line in the
sub-menu Settings.
>
Confirm by pressing OK.
>
Press the Menu key to revert to normal operation.
9.7 Encryption system
This menu item allows you to access the sub-menues of the
CI module inserted. By confirming with OK, you can display
information relating to the CI module inserted as well as to
the smart card being used.
Manual initialising of the CI module
>
You can initialise the CI module manually by pressing
the red function key CI Reset.
49
(Fig. 9-25)
Advertisement
Table of Contents
