Off Hook Voice Announce With Hands-Free Answerback; Pulse To Dtmf Conversion - Comdial DX-80 User Manual

Off Hook Voice Announce with Hands-free Answerback

With Off-Hook Voice Announce (OHVA), you can receive a voice
announcement from a DX-80 system extension while your telephone is
busy. OHVA uses the speakerphone circuit to accommodate a second
conversation path to your telephone. (To receive an OHVA call you must be
using the handset for the call in progress.) An OHVA call can be rejected
easily if the call in progress should not be interrupted.
Operation – Placing an OHVA to Another Extension
1. Call the busy extension.
2. Press [next]. The bottom row options change as follows:
3. Press [voic]. The OHVA call is established over the called extension
speakerphone.
Operation – Receiving an OHVA Call
1. While on a call using the handset, you receive an OHVA call:
2. Respond to the OHVA caller using the telephone speakerphone or
press [reject] to end the OHVA call.

Pulse to DTMF Conversion

When the system is connected to Dial Pulse (rotary) outgoing outside lines,
you may manually force the system to output DTMF tones for access to
special services. For example, if the DX-80 is connected to rotary outside
lines because of equipment limitations in your area, you may need to switch
®
to Touch Tone mode (DTMF) when connected to automated services like
bank-by-phone, etc.
Operation
1. Access an outside line (Signaling Type = Pulse) and dial any number.
2. After the pulse dialing has ended and the connection is made, press
.
Page 28
EXT XXX BUSY
cbck msg next
camp voic
OHVA EXT XXX
EXT XXX OHVA
reject
P7292 DETUG 03/04