Step 10 Secure Dishwasher To Cabinet; Step 11 Connect Water Supply - Danby DDW2405W Installation Instructions Manual

INSTALLATION INSTRUCTIONS
STEP 10 SECURE DISHWASHER
TO CABINET
The dishwasher must be secured to
the countertop.
• Position the dishwasher so that the tub flange
aligns with the front face of the cabinet frame.
IMPORTANT-
Check to be sure the dishwasher
is centered in the opening and there is no interfer-
ence with the adjacent cabinets when opening or
closing the door,
Figure 18
• Fasten the dishwasher to the underside of the
countertop with the 2 Phillips screws provided.
IMPORTANT
- Drive screws straight and flush,
Protruding screw heads will scratch the top of the
control panel and can interfere with door
opening/closing.
STEP 11 CONNECT WATER
SUPPLY
Connect water supply line to 90 ° elbow,
Method 1 - Braided flex hose
• Connect the stainless steel braided flex hose
directly to the 90 ° elbow (as show in Figure 19)
\L I, _/))4"i ;- i , ,--r "_ /
_E,b0'w'/o:o,o_. c.J
__ Stainless Sted
Hot W ater S upply L ine
Figure lg [_"_1
IMPORTANT
- Check to be sure that door spring
does not rub or contact the fill hose or water supply
line. Test by opening and closing the door, Re-route
the lines if a rubbing noise or interference occurs,