Section.6:.Maintenance - Pro Boat Miss Elam Plus Owner's Manual

Lubrication
It.is.important.to.lubricate.the.flex.shaft.of.
the.Miss.Elam,.Pro.Boat.recommends.genuine.
Pro.Boat.Marine.Grease.and.Grease.Gun.
(PRB0100),.with.silicone.cable.grease.after.
every.two.hours.of.operation..Do.not.forget.to.
do.this..You.can.purchase.this.silicone.grease.
at.your.local.hobby.store..To.lubricate.the.
drive.shaft,.follow.these.simple.instructions.
Collet.Nut
Collet
Nylon.Propeller.
1.5mm.Ferrule.
Setscrew
m.1..Carefully.note.how.the.drive.shaft.and.prop.
are.presently.installed..This.is.important.so.that.
when.you.have.finished.lubricating.the.drive.
shaft,.you.can.correctly.re-install.the.drive.shaft.
Section 6: Maintenance
Propeller.Nut
Washer
Drive.Dog
Propeller
m.2..Loosen.and.remove.the.1.5mm.setscrew.
that.holds.the.propeller.shaft..Remove.the.
propeller.and.shaft.from.the.aluminum.strut.
m.3..Insert.a.hex.driver.into.the.hole.located.on.
the.flywheel.to.lock.the.crankshaft.in.place..Then.
use.an.10mm.wrench.to.loosen.the.collet.nut.
1