Table of Contents
Advertisement
12
3
Type in the password, and then touch [OK].
–
When setting the Utility screen, you can also select a setting by using the keypad to enter the
number next to the desired button. To select [3 Administrator Setting], press the [3] key in the
keypad.
–
For details on setting or changing the password, refer to the User manual – Copy Operations.
The Administrator Settings screen appears.
Note
To quit specifying the Utility mode settings, press the [Utility/Counter] key. Otherwise, exit the Utility
mode by touching [Close] in each screen until the screen for the Copy, Fax/Scan, or Box mode appears.
To return to the Utility menu, touch [Close] until the desired screen appears. You can also touch the
menus in the left panel to return to the Utility menu.
12-40
Settings on the control panel
IC-208
Advertisement
Table of Contents
