Table of Contents
Advertisement
11
3
From the job list, select the job to be printed.
–
To print the remaining number of copies, continue with step 6.
–
To change the print settings, continue with step 4.
–
If the job you want to release is not displayed, touch
If a wrong job was selected, touch the button for the selected job again to cancel it.
4
Touch [Change Setting].
The Change Setting screen appears.
5
Change the print settings on the Change Settings screen, and then touch [OK].
–
To check the results of setting changes, select the job whose sample copy is to be printed from the
job list, and then touch [Proof Copy] on the control panel.
One copy is printed for checking.
Using [Proof Copy] restores the previous settings. Specify the settings again as necessary.
The Release Held Job screen appears again.
6
Touch [OK], or press the [Start] key in the control panel.
The stored job is changed to an active job, then printed.
Note
To cancel printing the job, touch [Cancel].
11-6
Function detail description
or
until the desired job is displayed.
IC-208
Advertisement
Table of Contents
