Preparation; Required Tools; Installation Requirements; Assembly Tips - Powerline PHG-1000X Owner's Manual

PHG-1000X

PREPARATION

Required tools

The basic tools that you must obtain before assembling
the PHG-1000X include but are not limit to:
• Standard Wrench Set
• Metric Wrench Set
• Adjustable Wrench
• Allen Key Set
• Screwdriver (Standard/Phillips)

Installation Requirements

Follow these installation requirements when assembling
the PHG-1000X:
Set up the PHG-1000X on a solid, fl at surface. A smooth,
fl at surface under the machine helps keep it level.
Provide ample space around the machine. Open space
around the machine allows for easier access.
For aesthetic purposes, insert all bolts in the same
direction unless specifi ed (in text or illustrations) to do
otherwise.
Leave room for adjustments. Tighten fasteners such as
bolts, nuts, and screws so the unit is stable, but leave
room for adjustments. Do not fully tighten fasteners until
instructed in the assembly steps to do so.
Fill out and mail the warranty card.
Ordering Replacement Parts
If you need to order replacement parts please be
prepared to provide the following information
when contacting us so that we can assist you better.
1. Model Number
2. Place of Purchase
3. Serial Number (S/N)
4. Part # and Description
© Best Company srl

Assembly Tips

Read all "Notes" on each page before beginning each step.
While you may be able to assemble the PHG-1000X using the
illustrations only, important safety notes and other tips may be
included in the text.
Some pieces may have extra holes that you will not use. Use
only those holes indicated in the instructions and illustrations.
NOTE: With so many assembled parts, proper
alignment and adjustment is critical. While
tightening the nuts and bolts, be sure to leave
room for adjustments.
NOTE: The bottles that are marked "Poison" is your
touch up paint. Keep away from children.
: Obtain assistance! If you feel like you can't
assemble the PHG-1000X by yourself then do
not attempt to do so as this could result in
injury. Review the Installation Requirements
before proceeding with the following steps.
YOUR S/N # CAN
BE FOUND HERE
5