Resetting The Handheld Terminal - Casio IT-500 Series User Manual

Resetting the Handheld Terminal

Resetting the Handheld Terminal is the same as restarting a computer. Performing a
reset causes all unsaved inputs and edits to be lost, but data that is already stored in the
memory as well as all settings should be unaffected.
Use reset to restore normal operation whenever the Handheld Terminal operates
abnormally due to misoperation or some other reason.
Use the stylus to press the reset switch on the back of the Handheld Terminal.
This starts the reset operation.
If reset does not find a memory problem
The Handheld Terminal restarts, and normal operation is restored.
If reset finds a memory problem
A message like the one shown below appears on the display when the reset operation
discovers a memory problem.
Memory Corruption Warning
A problem with memory contents has been
found. Press [Trigger key] to continue with
the reset procedure, which restores
Note that if the system determines that user
memory cannot be repaired, it will delete all
user data current in memory.
See the User's Guide for detail about
When this message appears, press the Trigger key to continue with the reset operation.
Note, however, that reset may not be successful depending on the condition of the
memory. In this case, perform the full reset operation described on the next page.
E-32
normal system operation.
installing memory.
Trigger
key