Position Input; Gps Selection - Standard Horizon Explorer GPS GX1700 Owner's Manual

14.8 POSITION INPUT

This selection allows the Latitude/Longitude of your vessel to be manually
entered so DSC Distress or a Position Report call will contain position infor-
mation. This feature maybe useful when the GX1700 is located in an area
where GPS reception is limited. Refer to section "9.10 MANUAL INPUTTING
A GPS POSITION ( LAT/LON ) " for setting.

14.9 GPS SELECTION

This selection allows the GX1700 to:
a. use the internal GPS to compute and display position information
(default setting).
b. use the NMEA output of Standard Horizon GPS Antenna (Q7000619A)
to input position information into the GX1700 when the GPS reception
is limited, such as the flush mounting of the GX1700. Refer to page 15
for connections. This is a useful feature when the GX1700 is located in
an area where GPS reception is limited.
When using an external GPS antenna or Chart plotter to input
position data, turn off the GPS receiver, refer to section "14.1 UNIT
POWER".
1. Press and hold down the
Menu " appears.
2. Press the
3. Press the
TION " with the
4. Press the
/ key to select " INTERNAL GPS " or " EXTERNAL
GPS ".
5. Press the
6. Press the
to radio operation.
Page 94
/ key to select " GPS SETUP ".
soft key, then select " GPS SELEC-
/ key.
soft key, then press the
soft key to save the new setting.
soft key several times to return
NOTE
key until " Setup
-Setup Menu-
GENERAL SETUP
CH Function Setup
DSC Setup
Waypoint Setup
GPS Setup
MMSI Setup
SELECT QUIT
-Setup Menu-
General Setup
CH Function Setup
DSC Setup
Waypoint Setup
GPS SETUP
MMSI Setup
SELECT QUIT
-GPS Setup-
Time Offset
Time Area
Time Display
Magnetic
Position Input
GPS SELECTION
SELECT QUIT
-GPS Selection-
INTERNAL GPS
External GPS
ENT QUIT
GX1700