Operation; Control Panel Operation; Menu Map; Configuration (Dmx) - Chauvet FX 350 User Manual

4. O
PERATION
Control Panel

Operation

Menu Map

Configuration
(DMX)

Starting Address

DMX
Personalities
Page 10 of 20
To access the control panel functions, use the four buttons located underneath the
display.
Button
<MENU> Selects an operation mode or backs out of the current menu option
<UP> Scrolls up the list of options or selects a higher value
<DOWN> Scrolls down the list of options or selects a lower value
<ENTER> Activates a menu option or a selected value
Mode Programming Levels
DMX Mode
NASL (SLoU)
NAFA (FASt)
Operating Mode
NStS (SrUn)
Pan
Tilt
Display
Channel Mode
Manual Pan
Range
Manual Tilt
Range
Reset
Load
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
on the product.
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product's channels.
The Intimidator™ FX 350 uses up to 15 DMX channels in its 15-channel personality,
which defines the highest configurable address to 498.
If unfamiliar with DMX, download the DMX Primer from www.chauvetlighting.com.
To select the starting address, do the following:
1. Press <MENU> repeatedly until d001–d512 shows on the display.
2. Use <UP> or <DOWN> to select the starting address.
3. Press <ENTER>.
The Intimidator™ FX 350 has two DMX personalities, a 7-channel personality and a 15-
channel personality.
To choose which DMX personality to use, follow the steps below:
1. Press <MENU> repeatedly until either 15CH (to choose the 15-channel personality)
or 7CH (to choose the 7-channel personality) shows on the display.
2. Use <UP> or <DOWN> to select the desired personality.
3. Press <ENTER>.
Function
Description
d001–d512 Sets the DMX starting address
Automatic mode, slow program
Automatic mode, fast program
Sound-Active mode
SLAv (Son)
Slave operating mode
PAn Normal pan operation
rPAn Inverse pan operation
tit Normal tilt operation
rtit Inverse tilt operation
diS Normal display
rdiS Inverse display
15CH Selects the 15-channel DMX personality
7CH
Selects the 7-channel DMX personality
PA54 Selects the 540° pan angle range
PA36 Selects the 360° pan angle range
PA18
Selects the 180° pan angle range
ti27 Selects the 270° tilt angle range
ti18 Selects the 180° tilt angle range
ti 9 Selects the 90° tilt angle range
rESt Resets fixture
LoAd Load factory defaults
Intimidator™ FX 350 User Manual Rev. 1