Other Functions; Tape Counter (Zero Search); Setting The Security Lock (Set Lock); Setting The Sw Out Terminal Output - Security Labs SL 700 User Manual

Other Functions

Tape Counter (Zero Search)

• When you insert a
Using the counter, it is easy to find a desired recording.
cassette, the counter
1 Press the CLEAR button, at the beginning of the
always resets to zero.
desired recording.
• There is no tape counter
indication for the blank
• The counter will be reset to "0H 00M 00S" (on screen).
portions of tape.
• The counter will be reset to "0H 00M"(on the display
• In the 2-hour recording
panel).
speed mode only, the tape
counter indicates real 2 After recording or playback, press the Menu button
hours, minutes and
to display the initial MENU.
seconds.
3 Press the SHIFT
• In the other SP recording
(
speed modes(24H, 36H),
the tape counter indication
4 Press the SHIFT
is a ratio of the 2-hour
mode base indication.(In SELECT menu. The SEARCH SELECT menu is
24-hour recording mode,
displayed.
each "second" of the tape
counter actually represents
approximately 24/2 =
12 real seconds.)
• In the other EP recording
speed modes(18H), the
tape counter indication is
a ratio of the 6-hour mode
base indication.(In 18-
hour recording mode,
5 Press the SHIFT
each "second" of the tape
counter actually represents
(
approximately 18/6 = 3
real seconds.) 6 Press the SHIFT
00M 00S"("0H 00M" on the display panel).
• There may be a slight
discrepancy between the
• The display returns to the normal screen.
position shown on the
tape counter and the
• The tape is rewound or advanced to the counter "0H
actual tape position.
00M 00S" reading("0H 00M" on the display panel).
• When rewinding the tape
past the "0H 00M 00S"
position("0H 00M" on the
display panel), a minus(-)
displayed.
27
button to move the arrow mark
) to Search Select.
button to display the SEARCH
button to move the arrow mark
) to Zero Search.
button to search the counter "0H
Time Lapse Video Cassette Recorder

Setting the Security Lock (Set Lock)

The security lock function is designed to prevent
accidental stopping of recording if the STOP button is
pressed inadvertently.
1 Set the SET LOCK switch to "ON" position.
• "
• While the security lock is
engaged, all commands
2 To cancel the security lock, set the SET LOCK switch
are disabled.
to "OFF" position.
• The security lock should
• "
not be engaged while a
menu is displayed.

Setting the SW Out Terminal Output

Synchronization pulses for multiplexers can be obtained
from the SW OUT terminal.
1 Press the MENU button, to display the initial MENU.
2 Press the SHIFT
mark(
3 Press the SHIFT
TERMINAL SET menu.
• If "TIMING" is set to
FRAME (see step 6),
"FRAME" will be indicated
instead of "FIELD".
4 Press the SHIFT
"FRAME").
• With each press of the SHIFT
changes as indicated below.
5 Press the SHIFT
6 Press the SHIFT
• FIELD . . . 1 pulse is output after each set number of
• FRAME . . 1 pulse is output after each set number frames.
Time Lapse Video Cassette Recorder
" is displayed on the display panel.
" will be erased from the display panel.
button to move the arrow
) to SW OUT Terminal Set.
button to display the SW OUT
button to set "FIELD" (or
button, the setting will
button, to select Timing.
button to set the "TIMING".
fields.
28