Normal Recording - Security Labs SL 700 User Manual

6 Press the SET - (or +) button to set "YES" for the
functions described below.
• The items for which "YES"
Time................The time is displayed.
is set are recorded. The
items for which "NO" is
Date ................The Month-Day-Year is displayed.
set at step 6 above are
Frame Cnt .......The number of frames is displayed.
not recorded.
Alarm Cnt ........The number of alarms is displayed.
Counter ...........The counter is displayed.
Title.................The title is displayed.
• A maximum of 20 characters can be used. (alphabet,
numbers, space)
7 Press the SHIFT
8 Press the SET - (or +) button to set the position of
the time, date, frame cnt. alarm cnt. to "L-Bottom
(or R-Bottom).
• If one of 4 items is set, the position of 4 items is
changed identically.
9 Press the SET - (or +) button to set the position of
counter, title to "C-Top" (or "R-Top" or "L-Top")
If one of 2 items is set, the position of 2 items is
changed identically.
L-Top / C-Top / R-Top
: Left Top / Center Top / Right Top
L-Bottom / R-Bottom
: Left Bottom / Right Bottom
10 Press the MENU button three times, the normal
screen is displayed.
The setting procedure is now complete.
13
button to set the display position.
Time Lapse Video Cassette Recorder

Normal Recording

Normal Recording
• If the Repeat Rec Set is set
1 Turn the power on to all devices used.
to "NO" in the REC
MODE SET menu ,
2 Load a cassette tape with erasure prevention tab in
recording will continue to
place.
the end of the tape, then
stop and the tape will be
3 Press the REC/PLAY SPEED
ejected.
the recording speed.
• The recording speed is displayed on-screen and on the
display panel.
• If you don't want to record the recording speed,
counter, title, time, date etc, press the DISPLAY button,
then start recording.
4 Press the REC button.
• A tape recorded on this
VCR cannot be played
• The "REC" indicator is displayed on the display panel
back on another make of
and recording starts.
time lapse VCR.
5 To stop recording, press the STOP button.
• If you press on the REC
button and the loaded
<Recording Speed>
cassette has no erasure-
prevention tab, the VCR
Recording
will eject the cassette.
Speeds &
• During recording, the
Duration T-
Menu button will not
function (the menu cannot
be accessed).
2(SP)
6(EP)
• If you playback the
18(EP)
recorded part where
recording check was
24(SP)
performed, noise may
appear.
36(SP)
• If you change the
recording speed during
recording, noise or
missing signal may result.
Record Pause
Recording can be interrupted temporarily.
• During pause, the image
appears on-screen but it is
1 Press the PAUSE/STILL button during recording.
not recorded.
• The "REC" and "
• If a recording pause
continues for 5 minutes or display panel.
more, the VCR will go into
2 To resume recording, press the REC button, or press
stop mode to avoid
damage to the tape.
the PAUSE/STILL button again.
Time Lapse Video Cassette Recorder
(or ) button to set
Recording Rec. Audio
Recording
Duration T- Fields Record-
Intervals
160 / Sec. ing
120
2.67 1/60 Sec 60 YES
8 1/60 Sec 60 YES
24 3/60 Sec 20 YES
32 12/60 Sec 5 NO
48 18/60 Sec 3.3 NO
(SP) means to be recorded by SP heads.
(EP) means to be recorded by EP heads.
" indicators are displayed on the
Tape Motion
Continuous
Continuous
Continuous
Intermittent
Intermittent
14