System Indicators - Toshiba NB200 Series User Manual

System indicators

The LED system indicators for specific computer operations glow when
those operations are in progress.
Wireless
communication
Wireless WAN
communication
DC IN
Power
Battery
HDD
User's Manual
Figure 2-2 System indicators
The Wireless communication indicator glows
amber when the Bluetooth and Wireless LAN
functions are turned on. Only some models are
equipped with Bluetooth and Wireless LAN
functions.
The Wireless WAN communication indicator
glows or blinks blue when the Wireless WAN
function is on. The indicator will glow or blink in
order to indicate the connection status of the
Wireless WAN function. A Wireless WAN module
must be installed to use this function. Some
models are equipped with a Wireless WAN
module.
The DC IN indicator normally glows green when
power is being correctly supplied from the AC
power adaptor. However, If the output voltage
from the adaptor is abnormal, or if the computer's
power supply malfunctions, this indicator will go
out.
The Power indicator normally glows green when
the computer is turned on. However, if you turn
the computer off into Standby Mode, this
indicator will flash amber - approximately two
seconds on, two seconds off - both while the
system is shutting down and while it remains in
Standby Mode.
The Battery indicator shows the condition of the
battery's charge - green indicates the battery is
fully charged, amber indicates the battery is
charging, and flashing amber indicates a low
battery condition. Please refer to Chapter 6,
Power and Power-up Modes
on this feature.
The HDD indicator glows green whenever the
computer is accessing the built-in hard disk drive.
The Grand Tour
for more information
2-2