Turning On The Power; Starting Up For The First Time - Toshiba NB200 Series User Manual

Turning on the power

This section describes how to turn on the power - the Power indicator will
then indicate the status. Please refer to the Monitoring of power condition
section in Chapter 6,
After you turn on the power for the first time, do not turn it off until you
have set up the operating system. Please refer to the section
up for the first time
The power button is disabled while the display panel is closed.
Volume cannot be adjusted during Windows Setup.
1. Open the computer's display panel.
2. Press the computer's power button.
1. Power button

Starting up for the first time

The Microsoft Windows XP Startup Screen will be the first screen displayed
when you turn on the power. Follow the on-screen instructions on each
screen in order to properly install the operating system.
When it is displayed, be sure to read the Software License Terms
carefully.
User's Manual
Power and Power-up Modes
for more information.
1
Figure 3-5 Turning on the power
Getting Started
for more information.
Starting
3-7