Toshiba NB200 Series User Manual page 105

Password
Problem
Cannot enter
password
Keyboard
Keyboard problems can be caused by your setup configuration. For more
information refer to Chapter 5,
Passwords.
Problem
Some letter keys
produce numbers
Output to screen is
garbled
LCD panel
Apparent LCD problems may be related to the computer's setup. Refer to
Chapter 7,
Problem
No display
Markings appear on
the LCD screen.
Problems above
remain unresolved or
other problems occur
User's Manual
Procedure
Refer to the
BIOS Setup and
Procedure
Check that the numeric keypad overlay is not
selected. Press FN + F11 and try typing again.
Make sure the software you are using is not
remapping the keyboard. Remapping involves
reassigning the meaning of each key. See your
software's documentation.
If you are still unable to use the keyboard,
consult your dealer
BIOS Setup and Passwords, for more information.
Procedure
Press hot keys FN + F5 to change the display
priority, to make sure it is not set for an external
monitor.
They might have come from contact with the
keyboard or touch pad. Try wiping the LCD gently
with a clean dry cloth. If markings remain, use
LCD cleaner. Be sure to let the LCD dry before
closing it.
Refer to your software's documentation to
determine if the software is causing the difficulty.
Contact your dealer if the problems continue.
Password section in Chapter 7,
Passwords.
The Keyboard Chapter 7,
Troubleshooting
BIOS Setup and
9-6