Adjusting Led Brightness; Listening To The Radio; To Set / Recall The Radio Presets - Electrohome EAAC475 User Manual

ADJUSTING LED BRIGHTNESS

You can adjust the brightness of the LED display making it brighter, dimmer or even
turning it OFF when the radio is OFF. There are four dimming options available: HIGH/
MEDIUM/LOW/OFF (Standby). Press the DIMMER/GRADATEUR button to toggle
between the four brightness settings.

LISTENING TO THE RADIO

1. Press the POWER ON/OFF
Press the AM / FM
2.
3. Press the
station at a time.
4. Press and hold the
back/forward through the stations; the unit will automatically scan to the next
broadcasting station.
5. Press and hold the POWER ON/OFF
the radio 'OFF'.
Please ensure that the FM antenna is completely unrolled and extended for best FM reception.
The AM band uses an internal directional aerial. For best reception, please rotate the radio.

TO SET / RECALL THE RADIO PRESETS

1. Press the POWER ON/OFF
When the radio is 'ON', press the
2.
FM radio bands.
3. Use the
4. Press the SET/NAP button; 'P02' will blink in the display.
5. Use the
P01-P10' number.
Press the SET/NAP button again to set the preset.
6.
OPERATING INSTRUCTIONS
button on the front panel to turn the radio 'ON'.
button to toggle between AM and FM radio bands.
DST/°C °F buttons once, to move back/move forward one
/
DST/°C °F buttons for one second to scan
/
button on the front panel to turn the radio 'ON'.
DST/°C °F buttons to select the desired radio station.
/
DST/°C °F buttons to toggle to the desired preset
/
button on the front panel to turn
AM / FM button to toggle between AM and
- 18 -
'