Installation Instructions; Cooktop Installation - Dacor Epicure EG366 Installation Instructions Manual

Unpack the Cooktop
WARNING
the gas and electric service provided does n0t
meet the product specifications, donot proceed with
the installationl Call the dealer, the gas supplier or a
licensed electrician.
The €ooktop is heavy A minimum of two people are
required to safely install it.
Unpack the parts box and verify that all required compo-
nents have been provided. If any item is missing or dam-
aged, please contact your dealer immediately. Do not install
a damaged or incomplete appliance. The customer must
report cosmetic issues within 30 days of installation.
• Grates (3) *
• Stack burner caps (2 large, 2 small)
• Stack burner rings (2 large, 2 small)
• Crown burner caps (2)
• Crown burner rings (2)
• Crown burner heads (2)
• Knobs (4 standard, 2 MAX GRIDDLE)
• Dacor Stainless Steel Cleaner
• WOK ring
• Griddle
• Hold down bolts/washers (2 sets)
• Regulator
• Product literature
• Model EG486 comes with (3) 14 inch grates. Model
EG366 comes with (2) 10-inch grates and (1) 14-inch grate.
Cooktop Installation
WARNING
• To prevent damage to the gas pressure regulator,
install it only after the cooktop is mounted in its per-
manent position.
• Do not over-tighten the hold down bolts. Over tight-
ening the hold down bolts may result in improper
operation of the dual gas burners.
IMPORTANT
DO n0tus e a hardening compound or caulk to
Permanently sea! the cooktop into p!ace. The cooktop
must be readily removable if service is requiredl Removal
of sealant to service the unit will be performed at the
customer!s expense.
Lower the cooktop into the cutout while feeding the
electrical cord into the utility cutout. Center the cooktop
in the cutout.
2. Secure the cooktop to the countertop using the two (2)
provided hold-down bolts and washers provided. Do
not overtighten the bolts.
8 _mC_