Gas Connections; Making The Connections - GE JGSP23 Installation Instructions Manual

Installation Instructions
Gas Connections
Making the Connections
2 1/2'_
Recommended area for 120V outlet on rear
wall and aea for through the wall connection
of pipe stub and shut-off valve
.
Before making gas connections, make sure
that the oven shut-off lever (visible at the back
of range) is in the open position.
Gas Supply
to Oven
Shut=Off Lever
Shown in the
Open Position _'_
Gas Supply to
Top Burner
5 1/2"_
Recommended area for
through the floor connection
of pipe stub and shut-off valve
Anti-Tip location
1. Install a manual shut-off valve in the gas
supply line in an easily accessible location.
2. Know how and where to shut off the gas
supply to the range.
3. Shut off gas supply before removing an old
range. Leave it off until hookup of new range
is finished.
4. Because solid pipe restricts moving the
range, we recommend use of an A.G.A.
certified metal appliance connector.
NEVER REUSE AN OLD CONNECTOR WHEN
INSTALLING A NEW RANGE.
I WARN IN G: Never reuse old flexible
A
connectors. The use of old flexible
connectors can cause gas leaks and
personal injury. Always use new flexible
connectors when installing a gas appliance.
Pressure Regulator
as see from Front of
Range
6. Install 1/2" flare union adaptor to the 1/2" NPT
elbow on pressure regulator.
7. Connect flexible appliance connector to flare
union.
8. Move range into approximate position and
connect flexible connector to gas supply line
with proper flare union adaptor.
Gias Sup
Flair Unions_
Flex
Connector
Pressure
Regulator
90 ° Street Elbow
.
10.
To prevent gas leaks, put a pipe joint sealant
on all male threads.
When you are finished making connections,
be sure that all range knobs are turned to
OFF before you open the main gas supply
valve.
8