GE JGSP23 Installation Instructions Manual page 6

Installation Instructions
Preparing the Counter
[_] sland Installation with Rear
Filler Strip
If your countertop does not have a post-
formed backsplash your choice may be to
use the rear filler strip kit.
24 1/2"
I
30" _,
Vented Rear
Filler Strip _A
nR t tor t u_ p _ Filler Strip
_ Overlap at
, N Rear of Cutout
From Front of Countertop
to Inside Wall of Cabinet
Use the screws provided to attach the filler strip
to the back of the range.
A IMPORTANT: For proper operation of
your self-cleaning gas range, you
must provide the correct cutout depth
as shown. DO NOT let the countertop or
other materials fill the space between the
back edge of the cooktop and the back of the
required cutout.
-_ tandard 25" Countertop with
a Post-Formed Backsplash
If your countertop has a post-formed backsplash
your choice may beto use the 4" backguard kit. Your
choice may be:
Kit No. JXS31/80501 (White)
Kit No. JXS32/22555 (Brushed Chrome)
Kit No. JXS33/80508 (Bisque)
Kit No. JXS34/80509 (Black)
You may order either of these kits from your Service
Center. The backguard kit will attach to the back of
the range and fill in the space between the back of
the range and wall. When using the backsplash kit,
the post-formed backsplash of the countertop must
be cut.
(Top view of counter cutout)
!/////////i//i,///_j__
30" 2TS__ear Wall
BackspEash
(End Caps Overlap Counter Backsplash)
_ Backguard
(Preassembled)
Trim End Cap
to fit
Post-Formed Counter
Backsplash Ends
6